4 - Maintenance
Daily maintenance
The display screen appears after start up with the definition below:
Operation
Check the mandrel thread
Control the battery load level
Add grease inside the traction fork
Replacement or cleaning of the mandrel
The Rivet Nut
®
should be screwed freely by hand
Oil draining and filling up
Replacement of the anvil
(If the internal diameter is > D + 0.5mm)
INSPECTION 1
Controling the main fonctions and performances
Replacement of the oil and draining
Calibration of setting load
INSPECTION 2
Full maintenance of the setting head (seal parts, spring, ...)
Replacement of the traction fork
Call Cardinal Components to Order or for a Quote
800-236-3200 - sales@rivetnutusa.com - www.rivetnutusa.com
Frequency
Everyday
Everyday
Each mandrel replacement
Between 5,000 and 10,000 cycles
Between 5,000 and 15,000 cycles
Between 25,000 and 50,000 cycles
Every 250,000 cycles
Every 500,000 cycles
20