Safety Recommendations - Bollhoff RIVNUT B 4090 Manual

Safety recommendations

Read all the warnings and instructions.
Failure to comply with the warnings and instructions can cause electric shocks,
fire and/or serious injuries.
Keep all the warnings and instructions for future reference.
We recommend you to read this User manual carefully before preparing, using or carrying out
device maintenance. Observe the safety rules in force in your Country in order to reduce the risk
of fire, electric shock and personal injury.
Always wear safety goggles when using electrically-operated tools. Keep the instructions in a safe place.
The Technical Service is at your disposal for advice or, if necessary, to give you an appropriate training.
General safety rules
Safety within the work area
Keep the work area clean and well lit. Cluttered benches and dark areas may cause accidents.
Do not use electrically-operated tools in an explosive atmosphere as, for example, in the presence of
flammable liquids, gases, dusts. Electrically-operated tools produce sparks which may ignite
dusts or gases.
When using an electrically-operated tool, keep all persons present, children and visitors at a distance.
Electrical safety
Battery charger
• Warning: to reduce the risk of injuries, only authorized batteries should be recharged. Other types
of batteries may explode, causing personal injury and damage
• Before using the battery charger, read all the warnings and instructions indicated on the battery,
battery charger and battery-powered products.
• Do not expose the battery to rain, snow or damp environments.
• In order to reduce the risk of damage to the cable and the plug, disconnect the battery charger
unplugging the plug. Never pull the cable.
• The use of non recommended accessories or accessories that are not sold by the manufacturer
can cause fires, electric shock and personal injury.
• Make sure the battery charger cable is in a position where it cannot be stepped on, exposed to
damage or stress, or stumbled over.
• Make proper use of the power supply cable. Do not carry the battery charger holding it by the
cable. Keep the cable away from heat sources, oil, water, cutting edges or moving parts.
Replace damaged cables immediately.
• Do not use the battery charger if it is damaged: have it repaired by a qualified assistance centre
• To reduce the risk of electric shocks, unplug the battery charger from the power outlet before carrying
out any maintenance intervention or cleaning. Switching the controls off does not reduce this risk.
• Do not disassemble the battery charger or the batteries: contact a qualified Assistance centre.
Incorrect reassembly can cause electric shocks or fire hazards.
Call Cardinal Components to Order or for a Quote
5
800-236-3200 - sales@rivetnutusa.com - www.rivetnutusa.com