Use; Procedure For Use; Unscrew Button - Bollhoff RIVNUT B 4090 Manual

3 - Use

The device can be used in all positions, carried by hand or suspended.

Procedure for use

• Install the battery
• Switch the device on, by pulsing on the main trigger
• Position the Rivet Nut
automatic screwing of the Rivet Nut
the Rivet Nut
® into the hole.
• Alternatively, insert the Rivet Nut
to activate the push-pull.
• Press the trigger and hold it until the mandrel has gone outside from the Rivet Nut
KEEP THE TRIGGER PRESSED FOR THE ENTIRE DURATION OF THE CYCLE.
IF THE TRIGGER IS RELEASED, THE INSERTION IS NOT CORRECT
Push pull (automatic)

Unscrew button

• If unscrewing is difficult, use the CENTER (UNSCREW / RESET) button.
To unscrew, hold the button down until the mandrel has fully gone outside from the Rivet
Nut
® thread.K
Call Cardinal Components to Order or for a Quote
800-236-3200 - sales@rivetnutusa.com - www.rivetnutusa.com
® on the mandrel. A light pressure starts the motor and causes the
® , then the shutdown (Push-Pull system). Then insert
® into the hole, then push the mandrel against it in order
Insert Crimp Spin off (automatic)
® thread.K
16