Traeger S7-USB User Manual page 80

Söllnerstr. 9 92637 Weiden info@traeger.de +49 (0)961 48 23 0 0
1. List of available cable / modules:
⇒ Linewise display of the products found with your properties
2. IP-Adress:
⇒ IP address and MAC address of the selected cable / module
3. Via network card:
⇒ Selection of the used network interface card
4. LAN-Type:
⇒ Selection of the be connected cable / Module Types
5. Several check boxes:
⇒ Manual entry: allows you to enter the parameters manually
⇒ no network: for products which are not in any network
⇒ Installing in the device Manager: Installs the PLC-VCOM COM port in Device Manager
(required only for S7 for Windows and S7 Doctor software)
⇒ RFC1006: activation of RFC1006 communication method
⇒ no network card selection: Passes the routing of packets to the operating system
⇒ serial interval times: slow down the serial transmission eg panel transfers
6. Search
⇒ With a click on Search you are sending an broadcast to every cable/module that is connected with your
network or your system. Every responding cable/module will be inserted to the list.
7. Help:
⇒ opens the Help menu of the configuration, if they have problems or questions
8. OK:
⇒ Ends the PLC-VCOM configuration and accepts the entered / selected settings
9. Cancel:
⇒ Ends the PLC-VCOM configuration and discards the entered / selected settings
S7-USB user manual 80 / 85 2019/10/05 05:07