Traeger S7-USB User Manual page 60

Söllnerstr. 9 92637 Weiden info@traeger.de +49 (0)961 48 23 0 0
The diskette show the current operating system installed on your PC for corresponding product.
The cabel-symbol on the right show the operating system which is installed on your product at the
moment.
With the button „default settings" you can set your products on default settings. Should the device be out
of order after configurated. This button is selectable after the version check.
With „Update" you can install the current operating system. This button also is selectable after version
check.
With „version check" your cable which is connected to the COM-Port reviewed.
The symbol next to version check shows the running update.
While update do not plug out the cable from the PLC or turn off the power supply (The cable
will lost all data)!
If the update is breaking before finished, it could be that the MPI-Cable displays in the first line of the LCD
„Load 1.50" and in the second line „CheckUpd". Close the MPI-Cable-Manger and restart it. After "check
version" (which could time about 30 seconds) and following „Update" the broken update is restarted and
finished.
8.3.4 Teleservice
In this dialog the spezific configuration of the Tele-Service is taken. There are 3 Tabs, where the last one is
activated:
S7-USB user manual 60 / 85 2019/10/05 05:07