Table of Contents
Advertisement
Söllnerstr. 9
Dialing method
Official number
To access an outside
line, first dial
Call Preferences:
Wait for dial tone before
dialing
Number of redial
attempts
Redial after
7.5.3 Index "Serial parameter":
In this dialog the transfer rate between modem and TS-Adapter is selected.
Connection Preferences:
The transfer-rate could be selected between the following values:
Transfer rate
2400, 4800, 9600, 19.2k, 38.4k, 57.6k and 115.2kBaud
The parity could be selected, but this is modem depended because some modems could
not handle the parity bit:
Parity
None: (There is no parity testing)
Odd: (The amount of bits set to 1 is odd)
Even: (The amount of bits set to 1 is even)
7.5.4 Index "Access Protection":
The access over a telephone line could be configured in this dialog.
Access Protection:
The administrator can change the configuration over a telephone line. The two user accounts can not
change the configuration.
S7-USB user manual
92637 Weiden
info@traeger.de
There are two possible call techniques:
MFV tone, the telephone number is transferred by several frequencies
IWV pulse, the telephone number is transferred with the amount of several
pulses on the line
If you need a prefix before your number to establish a call outside, you must
enter the prefix here e.g. 0.
In case the modem should wait for a free line, you should set the
corresponding checkbox.
At number of retries you could configure the number of retries for a
connection before the call is stopped.
Using a retry you could enter the seconds the application should wait
between calls.
+49 (0)961 48 23 0 0
47 / 85
2019/10/05 05:07
Advertisement
Table of Contents
