Tape - Playback; Loading A Tape; Playing A Tape - Sony MHC-WZ88D Operating Instructions Manual

Tape – Playback

Loading a tape

Use the buttons on the unit for the operation.
1
Press Z A or Z B.
2
Load a tape into deck A or B.
With the side
you want to
play back or
record facing
forward
3
Push the center of the tape lid to close
the deck.

Playing a tape

You can use TYPE I (normal) tape.
1
Load a tape.
2
Press FUNCTION +/– (or TAPE A/B on
the unit) repeatedly until "TAPE A" or
"TAPE B" appears in the display.
3
Press DIRECTION on the unit
repeatedly to select "g" to play back
*1
one side, "j"
sides or "RELAY"
back both decks in succession.
4
Press H (or hH on the unit).
The tape starts playing.
Press H (or hH on the unit) again to
play the reverse side.
Front side
indicator
*1
The playback stops automatically after
repeating the sequence five times.
*2
Relay Play follows this cyclic sequence up to
five times, then stops:
Deck A (front side) t Deck A (reverse side)
t Deck B (front side) t Deck B (reverse
side)
Other operations
To Do this
Stop playback Press x.
Pause playback Press X. Press X again to resume
playback.
Press m or M (or press
Fast-forward or
.m or M> on the unit
rewind
when playback is stopped). To
return to normal playback, press
H (or hH on the unit).
Z
Remove a tape Press
when playback is stopped.
to play back both
*2
(Relay Play) to play
Reverse side
indicator
A j j B
DSGX
Tape presence indicator
Z
A or B on the unit
continued
61 GB