Sony MHC-WZ88D Operating Instructions Manual page 59

4
Press ENTER.
A preset number flashes in the display.
The stations are stored from preset
number 1.
5
Press PRESET +/– repeatedly to select
the preset number you want.
6
Press ENTER.
"Complete!" appears in the display. The
station is stored.
7
Repeat steps 1 to 6 to store other
stations.
Other operations
To Do this
Tune in a station Follow the procedure described
with a weak signal in "Manual tuning preset"
(page 58).
Stop scanning Press x.
during automatic
tuning
Cancel presetting Press MENU.
To change the AM tuning interval
(except for Saudi Arabian and
Russian models)
Use the buttons on the unit for the operation.
The factory settings for AM tuning interval is
9 kHz (or 10 kHz for some areas). To change the
AM tuning interval, select any AM station first,
then turn off the system. While holding down x,
press ?/1 to turn on the system. "AM 9k Step"
or "AM 10k Step" appears in the display. When
you change the interval, all the AM preset
stations are erased. To reset the interval, repeat
the same procedure.
Preset number
STEREO TUNED
A j j B
DSGX
Note
You cannot change the AM tuning interval in Power
Saving Mode (page 76).
Tips
• The preset stations are retained for half a day even if
you unplug the power cord or if a power failure
occurs.
• If you press TUNER/BAND on the unit while the
system is turned off, the system turns on
automatically and "TUNER" is selected as the
function except during Power Saving Mode.
59 GB