4
Press H (or nN on the unit).
The tape starts playing.
Press H (or nN on the unit) again to
3)
play back the reverse side.
Tape presence indicator
GROOVE
A
B
Front side
Playback
Reverse side
indicator
direction
indicator
1)
(For the tape in deck B only)
The playback stops automatically after repeating the
sequence five times.
2)
Relay Play follows this sequence, then stops:
Deck A (front side) t Deck B (front side) t
Deck B (reverse side)
3)
You can only play back front side of the tape in
deck A.
Other operations
To
Do this
Press x.
Stop playback
Press X. Press X again to resume
Pause playback
playback.
Press m or M. To return to
Fast-forward or
normal playback, press H
rewind
(or nN on the unit).
Remove a tape
Press Z PUSH on deck A or deck
B when playback is stopped.
Note
Do not press Z PUSH on deck A or deck B while
playing a tape, otherwise the tape could be damaged.
Tips
• When a tape is inserted, the corresponding presence
indicator lights up in the display.
• If you press TAPE A/B on the unit while the system
is turned off, the system turns on automatically and
“TAPE A” or “TAPE B” is selected as the function
except during Power Saving Mode.
• If you press H (or nN on the unit) when the
TAPE A function is selected and there is no tape in
deck A, the system automatically switches to the
TAPE B function when there is a tape in deck B and
vice versa. Then, playback will start.
Page 60