Recording Onto A Tape Manually; Manual Recording - Sony MHC-WZ88D Operating Instructions Manual

Notes
• You can only record the tracks on the CD layer of a
Super Audio CD when you make CD Synchro
Recording.
• You cannot listen to other sources while recording.
• When you press CD SYNC, the sound field is
automatically changed to LINK if the headphones
are not connected and HP 2CH if the headphones are
connected.
• CD Synchro Recording stops when the currect disc
finishes playback.
• CD Synchro Recording cannot function in the
following conditions:
– during playback of the disc.
– the on-screen display is showing the password
input of parental control display.
– before the system finishes reading the Table of
Contents (TOC) of the disc.
• When CD Synchro Recording starts,
– the setting for Repeat Play changes to "REPEAT
OFF".
– Program Play and Shuffle Play is canceled.
• When you record from a VIDEO CD, PBC playback
is automatically canceled.
• When you connect or disconnect a microphone or
headphones during recording, the sound may cut off
for a moment.
Tips
• When recording from the reverse side:
After step 1 of "Recording your favorite disc onto a
tape", press TAPE A/B repeatedly until "TAPE B"
appears in the display. Press hH repeatedly until
the TAPE B reverse side indicator lights up to start
playback of the reverse side. Press x at the point you
want to start recording.
• When recording on both sides:
Be sure to start from the front side. If you start from
the reverse side, recording stops at the end of the
reverse side.
Recording onto a tape
manually

— Manual Recording

You can record just the portions you like from a
disc, tape or radio program onto a tape.
You can also record from the connected
components (see "Hooking up optional
components" on page 80).
Use the buttons on the unit for the operation.
1
Load a recordable tape into deck B.
2
Press DVD, TAPE A/B, TUNER/BAND or
VIDEO/SAT to select the source you
want to record.
3
Load the disc, tape or tune to the
station you want to record. To record
from the connected component,
connect the external audio sources.
4
Press REC PAUSE/START.
"REC" flashes in the display.
Deck B stands by for recording.
5
Press DIRECTION repeatedly to select
"g" to record on one side or "j"
(or "RELAY") to record on both sides.
6
Press REC PAUSE/START.
"REC" lights up in the display.
Recording starts.
7
Start playing the source to be
recorded.
To stop recording
Press x.
continued
63 GB