Specifications - Sony MHC-NX3AV Operating Instructions (primary manual) Operating Instructions Manual

Specifications

Amplifier section
For the U.S. model
AUDIO POWER SPECIFICATIONS:
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
with 6 ohm loads both channels driven, from
70-20,000 Hz; rates 100 watts per channel
minimum RMS power, with no more than
0.9% total harmonic distortion from 250
milliwatts to rated output.
Center Speaker:
Continuous RMS power output (reference)
Rear Speaker:
Continuous RMS power output (reference)
Canadian model
Front Speaker:
Continuous RMS power output (reference)
Total harmonics distortion
Center Speaker:
Continuous RMS power output (reference)
Rear Speaker:
Continuous RMS power output (reference)
46
35 watts
(8 ohms at 1 kHz,
10% THD)
35 + 35 watts
(8 ohms at 1 kHz,
10% THD)
130 + 130 watts
(6 ohms at 1 kHz,
10% THD)
Less than 0.07%
(6 ohms at 1 kHz, 60 W)
35 watts
(8 ohms at 1 kHz,
10% THD)
35 + 35 watts
(8 ohms at 1 kHz,
10% THD)
European model
Front Speaker:
DIN power output (rated) 90 + 90 watts
Continuous RMS power output (reference)
Music power output (reference)
Center Speaker:
DIN power output (rated) 25 watts
Continuous RMS power output (reference)
Music power output (reference)
Rear Speaker:
DIN power output (rated) 25 + 25 watts
Continuous RMS power output (reference)
Music power output (reference)
Other models
The following measured at AC 120/220/240 V,
50/60 Hz
Front Speaker:
DIN power output (rated) 95 + 95 watts
Continuous RMS power output (reference)
Center Speaker:
DIN power output (rated) 25 watts
Continuous RMS power output (reference)
Rear Speaker:
DIN power output (rated) 25 + 25 watts
Continuous RMS power output (reference)
(6 ohms at 1 kHz, DIN)
110 + 110 watts
(6 ohms at 1 kHz,
10% THD)
180 + 180 watts
(6 ohms at 1 kHz,
10% THD)
(8 ohms at 1 kHz, DIN)
35 watts
(8 ohms at 1 kHz,
10% THD)
70 watts
(8 ohms at 1 kHz,
10% THD)
(8 ohms at 1 kHz, DIN)
35 + 35 watts
(8 ohms at 1 kHz,
10% THD)
70 + 70 watts
(8 ohms at 1 kHz,
10% THD)
(6 ohms at 1 kHz, DIN)
120 + 120 watts
(6 ohms at 1 kHz,
10% THD)
(8 ohms at 1 kHz, DIN)
35 watts
(8 ohms at 1 kHz,
10% THD)
(8 ohms at 1 kHz, DIN)
35 + 35 watts
(8 ohms at 1 kHz,
10% THD)