Recording From A Tape - Sony MHC-NX3AV Operating Instructions (primary manual) Operating Instructions Manual

Recording from a
tape
— High-speed Dubbing
You can use TYPE I (normal) or TYPE II
(CrO2) tapes. The recording level is
automatically adjusted.
1/u
(Power)
– +
0 )
≠ +
g
·
ª · π
§
1 3
DOLBY NR
– +
§
1
2
∏ π
3
4
5
ª · π
§
2 4 1
π π
1
Press § and insert a recorded tape
in deck A and a recordable tape in
deck B.
With the side
you want to
play/record
facing forward
2
Press HI DUB.
Deck B stands by for recording.
3
Press DIRECTION repeatedly to
select A to record on one side.
Select ß (or RELAY) to record on
both sides.
4
Press REC PAUSE/START.
Dubbing starts.
To stop dubbing
Press π on deck A or B.
Tips
• When you dub on both sides, start recording from
the front side. If you record from the reverse side,
recording stops at the end of the reverse side.
• If you set DIRECTION to ß when the tapes you
use have different lengths, the tape in each deck
reverses independently. If you select RELAY, the
tapes on both decks reverse together.
• You don't have to set DOLBY NR, since the tape in
deck B is automatically recorded in the same state
as the tape in deck A.
• Dolby NR is off and DIRECTION (A or RELAY)
is ß when the mains AC power supply is
switched off.
§
19