Adjusting The Speaker Volume - Sony MHC-NX3AV Operating Instructions (primary manual) Operating Instructions Manual

Step 2: Setting up your speakers
(contnued)
Adjusting the speaker
volume
To enjoy Dolby Pro Logic Surround sound,
adjust the volume of each speaker.
–
0
≠
g
2,4
1
3
8
PRO LOGIC
+
)
–
+
+
·
ª ·
ª ·
= + p
0 ) P
V
B b
v
·
p
1
Press PRO LOGIC.
"PRO LOGIC ON" appears.
2
Press T. TONE on the remote.
The test tone is heard from the speakers
in the following order. Adjust the
volume of the test tone.
LEFT (front) n CENTER n RIGHT (front)
REAR
3
From your listening position, press
CENTER LEVEL (+/–) and REAR
LEVEL (+/–) on the remote to
adjust the volume.
The volume levels from each speaker
must become the same.
4
Press T. TONE when you are done
adjusting.
The test tone turns off.
Tips
• If you turn VOLUME (or press VOLUME +/– on
the remote) all the speaker volumes change.
• If test tone turns-off automatically, press T. TONE
on the remote to continue.
Note
The test tone feature works only for Dolby Pro Logic
Surround sound.