Mounting Hole Centers (All Models) - Jet JDPE-20EVS-PDF Operating Instructions And Parts Manual

Base
Base footprint LxW
Base working surface LxW
Number of T-slots
T-slot size WxD
T-slot centers
Main materials
Head
Table and Base
Spindle and Quill
Column
Pulley guard
Dimensions
Assembled overall dimensions LxWxH
Shipping crate dimensions LxWxH
Weights
Net weight
Shipping weight
1 Subject to local and national electrical codes.
2
The specified values are emission levels and are not necessarily to be seen as safe operating levels. As workplace
conditions vary, this information is intended to allow the user to make a better estimation of the hazards and risks
involved only.
L = length, W = width, H = height, D = depth
The above specifications were current at the time this manual was published, but because of our policy of continuous
improvement, JET reserves the right to change specifications at any time and without prior notice, without incurring
obligations.

4.1 Mounting hole centers (all models)

JDPE-20EVS-PDF
17-3/4 x 25-1/2 in. (450 x 650 mm)
14-3/16 x 13 in. (360 x 330 mm)
828 x 575 x 1788 mm (32.59 x 22.63 x 70.39 in.)
970 x 750 x 1980 mm (38.97 x 29.52 x 77.95 in.)
477 lbs. (217 kg)
566 lbs. (257 kg)
Figure 4-1: Base mounting
7
JDPE-20EVSC-PDF
2
5/8 x 11/16 in.
7.5 in. (190.5 mm)
cast iron
cast iron
steel
steel
steel
493 lbs. (224 kg)
582 lbs. (264 kg)