Pump Services - Kärcher HDS-E 8/16-4 M Series Service Manual

6.1.22Pump services

Function
83 °C SCTR_PUMPE
Display of the pump services.
The value is shown digit by digit
via the indicator lamps.
The display is repeated after a
pause.
Example:
7 pump services have been per-
formed since the device was first
used.
The indicator lamps light up in the
following sequence:
PAUSE
Reset the pump operating hours since the last
pump service

Turn off the appliance.

Turn the thermostat to 83°C.

Rotate the service switch into the "SET" position
and hold it there.
66
English 5.906-548.0 Rev. 00 (04/12)
adjustment
Display

Turn on the appliance.
The pump operating hours since the last pump
–
service are deleted.
The service counter pump (SCTR_PUMPE) will
–
be increased by 1.
The fault memory will be deleted.
–
Significance
Digit value "0"
Digit value "1"
Digit value "2"
Digit value "3"
Digit value "4"
Digit value "5"
Digit value "6"
Digit value "7"
Digit value "8"
Digit value "9"