Messages Via E-Mail - Siemens Synco OZW772 Series Commissioning Instructions

E-mail
Example of an e-mail
(fault message)
Example of an e-mail
(consumption data)
114 / 176
Siemens
Building Technologies
8.2

Messages via e-mail

SMTP is used to send fault messages, Energy indicator, system reports and Trend
and consumption data via e-mail. The mail server (SMTP server, outgoing mail
server) must be known to the Web Server to send e-mails to the Receivers (see
Section 2.5.3.3 "Communication", E-mail).
Email address of sender
e.g.
myaccount@bluewin.ch
DSL router
Ethernet
TCP/IP
OZW772.01
Email
IP address:
Subnet address:
Standard gateway:
DNS server 1:
Prerequisites for sending e-mails via Internet:
· An e-mail account is available and set up
(see Section 11.3.2, Free e-mail account providers ).
· Internet access is set up for the Web Server (see Section 8.1.3).
· The settings for "E-mail", "Message receiver 1...4", "System report"
or "Consumption data > Receiver" are made (see Section 2.5.3.3).
E-mail outline depends on message type and content.
In the listing below:
· User settings are in bold.
· The path for user settings starts each time with:
Home > 0.2.252 OZW772.16 > Settings > ...
· Set components of the e-mail are in italics.
Web server OZW772... V6.0
Communications
Internet
DNS server Mail server
mail.bluewin.ch
192.168.2.10
255.255.255.0
192.168.2.1
192.168.2.1
Email address receiver
e.g.
service@bluewin.ch
DSL router
PC
Email received
CE1C5701en
2015-10-12