Table of Contents
Advertisement
■ Test mode specifi cations in CD source
Display mode default: P-Time
• Procedure in CD-DA media (KTD-02A)
Key
Description of display
Track up procedure
Track down procedure
1
Jump procedure
2
Jump procedure
Information display
Mechanism model name
Mechanism version
Information display Servo
3
version (MP5110U/US)
Information display
Boot program version
(MP5110U/US)
6
Jump procedure
KTD-02A is used as CD media.
• Specifi cation to show the display inherent to the compressed media
When playing back MP3 / WMA / AAC disc, the fi le format is displayed (for 1 second) just before starting playing back each fi le.
Status
In the case of playing back MP3 fi le
In the case of playing back WMA fi le
In the case of playing back AAC fi le
■ Audio-related test mode
Procedure
To press [AUD] key briefl y (main unit)
[AUD] key, [∗] key (on the remote controller)
∗ SW Level is displayed when the item is valid.
∗ In SW Phase item, SWPRE is set to SW, and SWLPF SW is set to other parameter than Through.
Audio adjustment items (include both Audio Function mode and Audio Setup mode).
TEST MODE
Tr
–
X
X
:
Tr
–
X
X
:
6
E
2
0
.
S
E
R
V
.
B
O
O
T
.
Description of display
M
P
3
W
M
A
A
A
C
DPX-MP3110/MP3110S
DPX-MP5110U/MP5110US
Description
Every time pressed, jumps to the track shown below.
No.9 → No.15 → No.10 → No.11 → No.12 → No.13 → No.22 →
No.14 → No.9 (recursive)
But in case the disc has 8 tracks or less, playback starts with track
No.1. (when playing back the compressed fi le discs).
Goes down by 1 track from the currently played track.
Jump to Track/File No.28 (Scratch 0.7mm for music line vibration
testing)
Jump to Track/ File No.14 (Blurring surface disc: TCD-731RA Tr14)
Display of mechanism model name (DXM-6E20) and mechanism
version. (In the USB model, pressing key [3] while the display in the
left has been shown is to change the indicator to show the servo
information. Pressing other key is to show the normal display.)
Display of mechanism servo version. (Pressing key [3] while the dis-
play in the left has been shown is to change the indicator to show
the version of the boot program.)
The version of boot program is indicated.
Pressing key [3] while the indication in the left has been shown is to
change the indicator to show the normal indication.)
Jump to No.15. Set the volume value to 25 (2V PRE).
(For 20Hz 0dB DC protection error operation FCT checking)
The fi le that is to be played back is MP3 fi le.
The fi le that is to be played back is WMA fi le.
The fi le that is to be played back is AAC fi le.
Enter the Audio Adjustment mode. (Initial items should be Fader, and
then, Balance → Bass Level → Middle Level → Treble Level → ∗SW
Level → SystemQ → HPF Front → HPF Rear → LPF Sub Woofer. (Then
after, any adjustment can be done))
Description
Note
15
Hide quick links:
Advertisement
Table of Contents
