Sony DHC-NX5MD Operating Instructions Manual page 11

2
Press one of the DISC 1 – 5.
The disc tray closes and play starts.
If you press CD H, play starts from the CD
loaded on the tray whose number appears in
the display.
Disc tray number
1
Track number
To Do this
Press CD s.
Stop play
Press CD S. Playing time
Pause
starts flashing. Press again to
resume play.
Select a track During play or pause, turn the
jog dial clockwise (to go
forward) or counterclockwise
(to go back) and release it
when you reach the desired
track.
Press and hold down CD m
Find a point in
a track or M during play and
release it at the desired point.
Select a CD in stop Press one of the DISC 1 – 5
mode (or press D.SKIP on the
remote).
Play only the CD Press PLAY MODE
you have selected repeatedly in stop mode until
"1 DISC" appears.
Play all CDs Press PLAY MODE
repeatedly in stop mode until
"ALL DISCS" appears.
Remove the CD Press one of the CD 1 – 5 A.
Press one of the CD 1 – 5 A
Change other CDs
while playing a CD to open the tray that contains
the CD that you want to
change. When you change the
CD, press the same button to
close the tray. While the tray
is open, the DISC 1 – 5
indicator for that tray flashes
orange.
Adjust the volume Turn VOLUME.
Playing time
Tips
• Pressing CD H when the system is off
automatically turns on the system and starts CD
play if there is a CD on the disc tray (One Touch
Play).
When the system is in the Power Saving Mode, the
One Touch Play function does not work.
• You can switch from another source to the CD
player and start playing a CD just by pressing CD
H or the DISC 1 – 5 (Automatic Source
Selection).
• If there is no CD in the player, "CD No Disc"
appears in the display.
Note
Do not push the disc tray to close it, as this may
damage the CD player. Press CD 1 – 5 A to close the
disc tray.
11