Table of Contents
Advertisement
3.8 SpeedTouch™ NAPT Manager
Introduction
Using SpeedTouch™
NAPT Manager
E-SIT-CTC-20030306-0004 v2.0
The SpeedTouch™ NAPT Manager allows you to add static NAT entries for specific
applications.
To add a static NAT entry using SpeedTouch™ NAPT Manager:
1
Insert the SpeedTouch™ Setup CD-ROM in your computer's CD-ROM drive. The
SpeedTouch™ CD Browser will start automatically. Select your language in the
Choose Language window and go to Configuration > Configure NAT Settings.
Note
If the SpeedTouch™ CD Browser window does not appear automati-
cally, click Run on the Start menu and enter the following path:
D:\Menu.exe where D stands for the drive letter of your CD-ROM
drive.
2
The following windows will guide you through the detection process of the Speed-
Touch™610 as used by the SpeedTouch™ Setup wizard (see
Setup for Microsoft Windows Operating Systems" on page
3
The following page lists the current application hosts.
Click Add to enter a new application host.
3 The SpeedTouch™610 Web Interface
"1.3.1 Configuration
11).
57
Advertisement
Table of Contents
