Configuration Setup For Other Operating Systems - THOMSON Speedtouch 600 Series Orientation Manual

1.3.2 Configuration Setup for other Operating
Supported Operating
Systems
TCP/IP
Procedure
E-SIT-CTC-20030306-0004 v2.0
Systems
As the SpeedTouch™610 is OS-independent, this configuration setup can be used by
any computer system.
Note The following procedure may equally be used on MS Windows OSs.
Ensure that your operating system has a valid TCP/IP configuration.
Configure your computer with a static Net10 private IP address, e.g. 10.0.0.1, 10.0.0.2,
etc. Ensure, however, that you do NOT use the 10.0.0.138 IP address as this is the
default IP address of the SpeedTouch™610.
To ensure that IP connectivity exists, you can ping the SpeedTouch™610.
The configuration setup proceeds as follows:
1 Open a web browser and browse to the SpeedTouch™ IP address e.g. 10.0.0.138.
See "3 The SpeedTouch™610 Web Interface" on page 27
Note If you can not access the SpeedTouch™610 web pages, it is recom-
mended to reset the device. See
2 As a result the SpeedTouch™ System Info web page appears.
Expand the Advanced Topics and click Easy Setup.
Note If the SpeedTouch™ is in factory defaults, the Easy Setup wizard will
appear automatically.
3 The Welcome to the SpeedTouch™ Setup Wizard window appears:
Click Next to continue.
1 SpeedTouch™610 Installation
for more information.
"5 Troubleshooting" on page 69.
17