THOMSON Speedtouch 600 Series Orientation Manual page 10

1 SpeedTouch™610 Installation
Front panel LEDs
Ethernet port(s) LEDs
6
The SpeedTouch™610 is equipped with five LEDs on its front panel, indicating the state
of the device during normal operation:
Indicator
Name Color
LAN Green
Line TX Green
Line RX Green
Line Sync Green
PWR/Alarm Green
Red
Each Ethernet port on the rear panel has two LEDs:
10MB/100MB LED
Indicator
Name Color
10MB/100MB Green
Integrity Green
Activity
Description
State
Flashing Ethernet LAN activity
Off No Ethernet LAN activity
Flashing ATM cell transmission on DSL line
Off No transmission activity
Flashing ATM cell reception on DSL line
Off No reception activity
Flashing Initialization of DSL line
On DSL line synchronized
On Power on, normal operation
Flashing Power on, DIP switch 4 up
On Power on, startup pending
10/100Base -T
Description
State
Off 10Base-T Ethernet connectivity
On 100Base-T Ethernet connectivity
Off No connection on this port
On Ethernet link up. No activity
Flashing Activity on this Ethernet port
Link Integrity/Activity LED
E-SIT-CTC-20030306-0004 v2.0