Table of Contents
Advertisement
2 SpeedTouch™610 Internet Connectivity
2.1.2 Internet Sessions via the SpeedTouch™ Web
Starting a PPP session
Terminating an active
PPP session
26
Pages (all OSs)
To open a Routed PPP connection proceed as follows:
1
Open a web browser on your computer and browse to the SpeedTouch™610
web pages:
By default the SpeedTouch™610 offers you the System Information page.
2
In the Quick menu, click
enables you to establish dial-in connections.
3
Click
next to the connection entry you want to establish a connection with. As
a result the entry will be highlighted.
4
Enter your user name and password in the appropriate fields. If you want the
SpeedTouch™610 to remember your credentials, select Save this password.
5
Click Connect.
While the SpeedTouch™610 tries to start the session 'trying' appears in the State
column of the entry. Once the session is started successfully the field displays 'up'.
From then on you are online and you can start your application or browse the
Internet.
To close an active Routed PPP connection:
1
Make sure you have access to the SpeedTouch™610 web pages.
2
On the Connections page, click
the connection for.
3
Click Disconnect.
As a result the session state of the entry will change to 'down', i.e. it becomes idle.
Connections
to open the Connections page which
next to the connection entry you want to close
E-SIT-CTC-20030306-0004 v2.0
Advertisement
Table of Contents
