Mounting the PRLK048A0 /
PRLK096A0 EEV Kit
1. Remove the Top Panel by unscrewing the screws
at the four (4) corners.
2. Using the Bottom Panel as a template, mark the
location on the wall or ceiling where the holes
for the screws should be placed. Drill the four (4)
holes.
3. Attach the EEV Bottom Panel securely using four
(4) field-supplied 1/4 inch long screws.
Mounting the PRLK396A0 EEV Kit
1. Remove the two screws
from the EEV kit base plate
4. Remove the cover plate
Figure 19: Removing the Screws.
2. Remove the base plate.
5. Drill holes in the correct locations
and use 4 field-provided screws
to secure the EEV kit.
A
Pipe diameter 5/8"
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
EEV KIT INSTALLATION
3. Remove the four screws
from the cover plate
B
Model
PRLK396A0 10-3/4 7-1/2
PRLK594A0 10-3/4 7-1/2
Hole
size
1/4"
Pipe diameter 5/8"
Mounting the EEV Kit
Figure 20: EEV Bottom Panel
Hole Dimensions.
7-1/2 inches
Ø1/4"
length (inch)
A
B
37