Connecting optional
components
Connecting optional A/V
components
To enhance your system, you can connect optional
components. Refer to the operating instructions of
each component.
Connecting a portable MD,
etc.
Connect a portable MD, etc., to the LINE IN jack
on the front panel of the unit, using an audio
connecting cord (not supplied).
`/1
HS
S
h
Portable MD,
etc.
l
m
M
L
A
HS
H
A
Stereo
mini-
plug
Audio
connecting
cord
Connecting external
aerials
Connect an external aerial to improve reception.
FM aerial
Connect an commercially available FM external
aerial, or you can use a TV aerial instead.
IEC standard socket
connector (not supplied)
AM aerial
Connect a 6- to 15- meter insulated wire to the
AM aerial terminal. Leave the supplied AM loop
aerial connected.
Important
If you connect an external aerial, connect a ground
wire to the U terminal. To prevent a gas
explosion, do not connect the ground wire to a gas
pipe.
A M
Insulated wire
(not supplied)
A M
65