Sony CMT-J3MD Operating Instructions Manual page 64

Timer recording radio
programmes (continued)
To change the setting
Start over from step 1.
To check the setting / To use the
timer
1 Press CLOCK/TIMER SELECT.
2 Press . or > to select either "MD REC"
or "TAPE REC", then press ENTER/YES.
To cancel the timer
Press CLOCK/TIMER SELECT and press .
or > repeatedly until "TIMER OFF" appears,
then press ENTER/YES.
Tip
When you record from the radio, the station name
(see page 59, or frequency when the station is not
labelled), the start time and the stop time are
automatically recorded on the MD.
Notes
• The Smart Space and Level Synchro Recording
functions do not operate.
• You cannot activate Daily Timer and the recording
timer at the same time.
• Do not operate the system from the time the system
turns on until the recording starts (about 30 seconds
before the preset time).
• When you record on a brand new MD, the first
15 seconds are not recorded.
• If the system is on about 30 seconds before the
preset time, the timer-recording will not be
activated.
• The volume is reduced to minimum during
recording.
• When the timer is set, the Power Saving Mode does
not function.
64