Table Of Contents - Sullair SUPERVISOR CONTROLLER Instruction Manual

1. SAFETY AND INTRODUCTION
1.1 SAFETY
1.2 SUPERVISOR CONTROLLER, SUPERVISOR II AND WS CONTROLLERS
1.3 SEQUENCED COMPRESSOR SYSTEMS
2. SEQUENCING WITH MULTIPLE CONTROLLERS
2.1 NORMAL OPERATION
2.2 COMPRESSOR SYSTEM
2.3 WIRING AND PIPING
2.4 MACHINE PREPARATION PRIOR TO SEQUENCING
2.5 SYSTEM OPERATION
2.6 SYSTEM SETUP AND TUNING
2.6.1 GENERAL SEQUENCING RULES
2.7 CHANGING SEQUENCE PARAMETERS
2.8 SEQUENCE PARAMETER NAMES
2.9 SYSTEM DISPLAY- SUPERVISOR CONTROLLER
2.10 SYSTEM DISPLAY- SUPERVISOR II DELUXE
2.11 SYSTEM DISPLAY- WS CONTROLLER
2.12 REMOVING A MACHINE FROM SEQUENCE FOR MAINTENANCE
2.13 CALIBRATION OF P2 PRESSURE TRANSDUCERS
2.13.1 SUPERVISOR P2 PRESSURE TRANSDUCER CALIBRATION
2.13.2 SUPERVISOR II DELUXE P2 PRESSURE TRANSDUCER CALIBRATION 13
2.13.3 WS CONTROLLER P2 PRESSURE TRANSDUCER CALIBRATION
2.14 FULL LOAD FEATURE
3. SEQUENCING WITH VARIABLE SPEED DRIVE COMPRESSORS
3.1 VARIABLE SPEED DRIVE APPLICATIONS
3.2 SETUP FOR FIXED SPEED MACHINES AND A VSD COMPRESSOR
3.3 SETUP FOR MULTIPLE VSD COMPRESSORS
4. OPERATION WITH REMOTE CONTROLLERS
4.1 NORMAL OPERATION
4.2 CONTROLS WIRING AND ADJUSTMENT - SUPERVISOR CONTROLLER
4.3 CONTROLS WIRING AND ADJUSTMENT - SUPERVISOR II DELUXE
4.4 CONTROLS WIRING AND ADJUSTMENT - WS CONTROLLER
OPERATOR IS REQUIRED TO READ
ENTIRE INSTRUCTION MANUAL

TABLE OF CONTENTS

1
1
1
1
3
3
3
4
4
5
6
7
7
8
10
10
11
11
12
12
13
13
15
15
15
16
17
17
17
18
19
Continued