Messages; Specifications - Sony CMT-EX200 Operating Instructions Manual

Messages

One of the following messages may appear or
flash in the display during operation.
CD
NO DISC
There is no CD.
OVER
You have reached the end of the CD while
pressing M during play or pause.
STEP FULL
You tried to program 25 or more tracks (steps).

Specifications

Main Unit (HCD-EX200)
Amplifier section
For the U.S. model
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
With 4 ohms loads, both channels driven, from
120 – 10,000 Hz; rated 12 watts per channel
minimum RMS power, with no more than 10% total
harmonic distortion from 250 milli watts to rated
output.
Canadian model:
Continuous RMS power output (Reference):
Inputs
PC/TAPE IN:
Outputs
PC/TAPE OUT:
CD DIGITAL OUT:
PHONES (stereo mini jack):
CD player section
System
Laser
Frequency response
Tuner section
FM stereo, FM/AM superheterodyne tuner
FM tuner section
Tuning range
Antenna
Antenna terminals
Intermediate frequency
15 + 15 watts
(4 ohms at 1 kHz,
10% THD)
voltage 250 mV,
impedance 47 kilohms
voltage 250 mV,
impedance 1 kilohms
Optical
accepts headphones of
8 ohms or more
Compact disc and digital
audio system
Semiconductor laser
( =780 nm)
Emission duration:
continuous
20 Hz – 20,000 Hz
87.5 – 108.0 MHz
(100 kHz step)
FM wire antenna
75 ohms unbalanced
10.7 MHz
continued
21