Sony CMT-EX200 Operating Instructions Manual page 22

Specifications (continued)
AM tuner section
Tuning range
Antenna
Intermediate frequency
Satellite speaker (SS-CEX200)
Speaker system
Speaker units
Woofer:
Tweeter:
Impedance
Dimensions
Mass
General
Power requirements
Power consumption
Dimensions
Mass
Supplied accessories
22
530 – 1,710 kHz
(with the interval set at
10 kHz)
531 – 1,710 kHz
(with the interval set at
9 kHz)
AM loop antenna
External antenna terminals
450 kHz
2-way, bass-reflex type
9 cm dia., cone type
5 cm dia., cone type
4 ohms
130 220 183 mm
(w/h/d, incl. projecting
parts and controls)
Approx 2.0 kg net per
speaker
120 V AC, 60 Hz
40 watts
1.8 watts (in standby
mode)
175 222 201 mm
(w/h/d, incl. projecting
parts and controls)
Approx. 3.2 kg
Remote commander with
battery (1)
AM loop antenna (1)
FM wire antenna (1)
Speaker cords (4)
Sub woofer (SA-WEX200)
Amplifier section
For the U.S. model
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
With 4 ohms loads, from 50 – 150 Hz; rated 30 watts
per channel minimum RMS power, with no more than
10% total harmonic distortion from 250 milli watts to
rated output.
Canadian model:
Continuous RMS power output (reference):
Speaker system
Speaker unit
Practical maximum output 30 watts
Reproduction frequency range
High frequency cut-off range
Phase selector
Input
Output
Power requirements
Power consumption
Dimensions
Mass
Design and specifications are subject to change
without notice.
30 watts
(4 ohms at 55 Hz, 10%
THD)
Active sub woofer
(magnetically shielded
design)
10 cm dia, cone type
woofer ( 2)
45 – 150 Hz
70 – 150 Hz
Normal, reverse
SPEAKER INPUT:
Input terminal
SPEAKER OUTPUT:
Output terminal
120 V AC, 60 Hz
40 watts
Approx. 150 220
345 mm (w/h/d, incl.
projecting parts and
controls)
Approx. 6.2 kg