Optional Components; Hooking Up The Optional Components - Sony CMT-EX200 Operating Instructions Manual

7
Press . or > repeatedly to select
the desired sound source.
The indication changes as follows:
* Select "PC/TAPE" to use an optional
component connected to the PC/TAPE jacks as
the sound source.
8
Press ENTER on the remote.
The start time, the stop time, and the sound
source appear in turn, before the original
display returns. "DAILY" lights up.
9
Press ?/1 to turn off the system.
Other Operations
To Do this
Check the setting Press CLOCK/TIMER
SELECT on the remote
repeatedly until "DAILY"
appears. The start time,
followed by the stop time, the
sound source appears, then
original display appears.
Change the setting Start over from step 1.
Cancel the timer Press CLOCK/TIMER
SELECT on the remote
repeatedly until "TIMER
OFF" appears.
Notes
• If the system is on about 30 seconds before the
preset time, the Daily Timer will not be activated.
• Do not operate the system from the time the system
turns on until the play starts (about 30 seconds
before the preset time).
• Once you set the Daily Timer, it functions every
day until you cancel it.

Optional Components

Hooking up the optional
components
You can connect a digital or an analog
component to this system.
To connect optional components, remove the
small rear cover first.
To the audio input
jacks of an optional
component
PHONES jack To the digital input jack
of a digital component
To Do this
Make a digital Connect a optical cable.
recording to a
digital component
Make an analog Connect the audio cords.
recording to an
analog component
Listen to the Press FUNCTION repeatedly
connected optional until "PC/TAPE" appears (or
component press PC/TAPE on the remote).
Listen through the Connect the headphones to the
headphones PHONES jack.
To the audio output
jacks of an optional
component
17