Loading A Cd; Playing A Cd; Normal Play/Shuffle Play; Repeat Play - Sony CMT-EX200 Operating Instructions Manual

CD

Loading a CD

1
Touch OPEN/CLOSE Z (or press OPEN/
CLOSE Z on the remote) to raise the
disc tray.
2
Place a CD vertically in the disc tray.
With the label side facing front.
When you play a CD single (8 cm
CD), use the optional adaptor.
3
Touch OPEN/CLOSE Z (or press OPEN/
CLOSE Z on the remote) again to lower
the disc tray.
Note
Do not touch the playing side of the CD with your
fingers, as this may damage CD or cause the CD to
load prematurely.

Playing a CD

— Normal Play/Shuffle Play/Repeat
Play
This system lets you play the CD in different
play modes.
Track number
1
Press FUNCTION repeatedly to switch
the function to CD.
2
Press PLAY MODE on the remote
repeatedly until the mode you want
appears in the display.
Select To play
No display All the tracks in original
(Normal Play) order.
SHUF All the tracks in random
(Shuffle Play) order.
PGM All the tracks in the order
(Program Play) you want them to be played
(see "Programing CD
tracks" on page 12).
3
Press NX (or CD N on the remote).
Playing time
continued
11