Assembling The Mounting Plates - Technifor UC500 Operating And Maintenance Manual

Installation
D
A

Assembling the mounting plates

(Case of the CCU installed at the back of a cabinet)
The back panel of the CCU has 4 mounting holes. A screw is already attached in one of these holes.
• Remove this screw.
• Attach the plates to the back panel of the CCU, and check that they are secure.
Imperatively use the screws provided.
Always leave a gap of 3 cm (1.181 in) above the CCU's cooling fan.
Ref. DCD01/3067 - UC500_en_D 24/27