Connection Diagram For The Dedicated Inputs / Outputs - Technifor UC500 Operating And Maintenance Manual

Communication
C
A

Connection diagram for the dedicated Inputs / Outputs

SubD 9F Machine Communication
CCU side
Start marking
External contact
Stop marking
External contact
Gnd
Marking in progress
External light
Marking in progress
Fault
External light
Machine ready
External light
Common Relay
Note
In the diagram above, the Inputs are wired to the internal power supply, available on the connector of the CCU
(+ 24 V DC). The "Marking in progress", "Machine ready" and "Fault" Outputs are wired to an external power
supply.
Ref. DCD01/3067 - UC500_en_D 13/27