Connecting The Power Cord; Binding Cables - Sharp PN-CE701H Operation Manual

Caution
• Use only the power cord supplied with the monitor.
1. Turn off the main power switch.
2. Plug the power cord (supplied) into the AC input terminal.
3. Plug the power cord (supplied) into the power outlet.
The supplied cable clamps can be used to clamp the power cord and cables connected to the back of the monitor.
Attach the supplied cable clamps (affixing type) to a flat surface, removing any dust or dirt before attaching.
Do not attach over a vent.
14
E

Connecting the Power Cord

Binding Cables

Cable clamp
(affixing type)
Affixing point
Main power
1
switch
AC input
2
terminal
Power cord (Supplied)
3
For power outlet
Cable