Sharp PN-CE701H Operation Manual page 23

nSwitching the screen size
Even when the screen size is changed, the display may remain the same depending on the input signal.
16:9
4:3
Dot by Dot
TIPS
• Using this monitor's screen-size switching function to compress or expand the screen for commercial or public viewing in
establishments like cafes or hotels may infringe on the rights of the creators, as protected by Copyright Law, so please be
careful.
• The appearance of the original video may change if you select a screen size with a different aspect ratio than the original
image (e.g. TV broadcast or video input from external equipment).
• When playing commercial software, parts of the image (like subtitles) may be cropped. In this case select the optimal screen
size using the screen-size switching function of this monitor. With some software, there may be noise or distortion at the
edges of the screen. This is due to the characteristics of the software, and is not a malfunction.
• Depending on the original video size, black bands may remain at the edges of the screen.
Displays the image with an aspect ratio of 16:9 so it fills the entire screen.
Use with 16:9 signals such as 3840 × 2160, 1920 × 1080 or 1280 × 720.
Displays the image with an aspect ratio of 4:3 so it fills the entire screen.
Use with 4:3 signals such as 640 × 480, 800 × 600, or 1024 × 768.
When showing such as 16:9 video, the width of the image will be shrunk.
Displays the dots of the input signals as the corresponding dots on the screen.
Basic Operation
23
E