Sharp PN-CE701H Operation Manual page 13

4. TOUCH PANEL terminal 1 (for touch panel)
• To use the touch panel with a computer, connect the
touch panel to the computer with a USB cable.
• To use this terminal, connect your computer to the HDMI
1 input terminal on the front of the monitor.
5. Audio input terminal
• Use an audio cable without resistance.
• When using this terminal for input, do not input audio from
any other terminals.
• You cannot adjust the volume with volume adjustment.
Please control volume on source device.
6. Digital audio output (optical) terminal
• Audio that is input into the monitor is output.
• Connect using a commercially available audio digital
cable.
• The output sound varies depending on the input mode.
• You can adjust the volume with volume adjustment.
7. LAN terminal
• When Power Save Mode is Off, you can connect to a
network and use the Wake on LAN function.
8. HDMI 2 input terminal
9. HDMI 3 input terminal
• Use a commercially available HDMI cable (conforming to
the HDMI standard) that supports 4K.
10. RS-232C input terminal
• You can control the monitor from a computer by
connecting a commercially available RS-232 straight
cable between these terminals and the computer. The
terminal on the monitor is a female-type connector.
11. Component input terminals (AV/YPBPR)
• Change the input mode to YPBPR.
• This can be used as a video input terminal. Connect to
the [VIDEO] input terminal, and change the input mode to
AV.
12. Audio input terminals (for Component input terminals)
13. Audio output terminal
• The output sound varies depending on the input mode.
14. TOUCH PANEL terminal 2 (for touch panel)
• To use the touch panel with a computer, connect the
touch panel to the computer with a USB cable.
• To use this terminal, connect your computer to the video
input terminal on the rear of the monitor.
Connecting Peripheral Equipment
15. SD card slot
• Insert an SD memory card or SDHC memory card. SD
memory cards (up to 2GB) and SDHC memory cards (up
to 32GB) are supported. The explanations in this manual
refer to both SD memory cards and SDHC memory cards
as "SD memory cards".
• Before removing an SD memory card, follow the steps for
removal. (See page below.)
Supported SD memory cards
File System
Capacity
• D o not use an SD memory card with a security function
or a write protection function.
16. D-sub 1 input terminal (VGA1)
17. D-sub 2 input terminal (VGA2)
18. D-sub output terminal
19. Audio input terminal 1
20. Audio input terminal 2
• Use an audio cable without resistance.
n How to remove a USB flash drive or an
SD memory card
1. In the home screen of APPLICATION mode, touch
and touch "Storage".
2. Touch of the device you want to remove.
FAT32
Up to 32 GB
(maximum file size 4 GB)
13
E