Handling Chemical Products Safely - Hardi FALCON Boom Series Operator's Manual

12.Before transporting the sprayer, ensure that the boom is fully folded
and fully locked into transport rests and stops. Ensure all locking
devices are fully engaged whether hydraulic or mechanical.
13.Slow moving tractors and spray equipment can create a hazard when
on public roads. Avoid personal injury or death resulting from any
accidents by using flashing lights. Local regulations may require
installation of warning lights.
14.Avoid injuries from high pressure fluids penetrating the skin by relieving
system pressure before disconnecting hydraulics or other lines. Ensure
all fittings are tight before applying pressure to the system.
15.Understand service procedures before undertaking any maintenance.
Never lubricate, service, or adjust the spray boom while its operating.
Securely support any components before working on them.
16.Keep all parts in good condition and properly installed. Fix damaged
parts immediately. Replace worn or broken parts. Remove excessive
buildup of grease, oil, or debris.

2.3 Handling Chemical Products Safely

1. Direct exposure to hazardous chemicals can cause serious injury.
These chemicals can include lubricants, coolants, paints, adhesives
and agricultural chemicals. Material Safety Data Sheets (M.S.D.S.)
are available for all hazardous chemicals which inform the user of
specific details including, physical and health hazards, safety procedures,
and emergency response techniques.
2. Protective clothing such as rubber gloves, goggles, coveralls and
respirator must be worn during operation. All protective clothing should
be kept in excellent condition and cleaned regularly or discarded.
3. If chemicals come in contact with any exposed skin areas, wash
immediately with clean water and detergent. Never place nozzle tips
or any other components that have been exposed to chemicals to
mouth to blow out obstructions. Use a soft brush to clean spray
nozzles.
HARDI ® FALCON BOOM OPERATOR'S MANUAL 9