Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Watts BT-FR02-RF
Summary of Contents for Watts BT-FR02-RF
- Page 1 Central Unit « WIFI » & Central Unit «non‐WIFI» GB INSTALLATION AND USER GUIDE 2‐8 NL INSTALLATIE‐ EN GEBRUIKERSHANDLEIDING 9‐15 DK DK INSTALLATION – OG BRUG GUIDE 16‐22 SE INSTALLATION – OCH ANVANDNING GUIDE 23‐29 INSTALLASJONS- OG BRUKSANVISNING 30‐36 D GEBRAUCHSANLEITUNG 37‐43...
-
Page 2: Main Characteristics
50 lighting devices (ON/OFF). Back up Battery operation of 1 hour maximum You may have to use a Watts RF repeater if you want to RF Communication only with WATTS® Vision® devices (up extend the RF range. -
Page 3: Main Screen
1 INSTALL YOUR CENTRAL MAIN SCREEN ICONS Wall mounting 1- Connect the power as described below : NOT TO BE USED Date Display the time or the ambient T° of the room or zone. Make MAINS POWER SUPPLY 85-265VAC - 50/60HZ your choice by pressing on the central part of the screen 2- Screw the power unit on the wall and connect to power... - Page 4 3 CREATE YOUR HOUSE HYDRAULIC SYSTEM PAIRING If your installation has a number of hydraulic circuits containing long press on multiple pumps, you may want to drive each pump separately from specific thermostat(s) or thermostatic actuator(s). With You now need to “create” your house - a list of rooms where the smartvision you can create and control up to 4 hydraulic various devices such as thermostats will be placed.
-
Page 5: Installation Types
You can then operate your central unit from anywhere. Watts is not responsible for the correct operation of the connected devices, and potential damage caused by malfunction or improper use of the connected devices and appliances. 6 HEATING/COOLING DEVICES MANAGEMENT &... - Page 6 Device type choice (heating/cooling, lighting, On/Off). These PROGRAMMING YOUR DEVICES buttons are only displayed if one device type is installed in the room (colored if active). Room changing. Auto Mode : In this mode, the room temperature will Current mode, press on this icon to enter in the menu where you follow the program you have chosen.
- Page 7 LIGHTING DEVICES MANAGEMENT ON/OFF DEVICES MANAGEMENT Press on in the main screen and press Press on in the main screen and on Device type choice (heating/cooling, lighting, On/Off). These buttons are only displayed if one device type is installed in the room (colored if active).
- Page 8 8 languages are proposed. If you want to select another language, you need to insert the software (available on http://wattswater.eu/catalog/regulation-and-control/watts- vision-smart-home/watts-vision-system-smart-home/) on a microSD then select 8 new languages. General commands menu. Use this menu to put all the same devices type in the same operating mode.
- Page 9 Wifi central unit) before removing the microSD from the central unit. The SW and the procedure to update the central unit is http://wattswater.eu/catalog/regulation-and- available on: control/watts-vision-smart-home/watts-vision-system-smart- home/ Cloning: a Device” The menu allows to transfert a configuration from central 1 to a- To put the menu in reception mode.
Need help?
Do you have a question about the BT-FR02-RF and is the answer not in the manual?
Questions and answers