Installation - Kleenmaid RHSOR61 Instructions For Use And Warranty Details

INSTALLATION

METHOD 1
• Determine the final position of the hood and the alignment of the front faces of the hood and the
cabinet. Mark and pre-drill the four (4) fixing screw holes into the cabinet above the range hood
according to the diagram. These should line up with the 4 keyhole slots on the top of the range
hood. Check that the holes are correctly located, by temporarily fitting the range hood into place
and checking the alignment of the holes.
• On the cabinet, install the 4 screws (supplied) according to the relative position of the 4 key holes
on the bottom of the hood. The 4 screws should be in the narrow parts of key holes. Check the
alignment of the hood in the cabinet and tighten the screws firmly so that the hood is securely
attached to the cabinet and doesn't move in any direction.
Information
When cutting or drilling into wall or ceiling, do not damage electrical wiring or
other hidden utilities.
METHOD 2
Y
240
Security hole
595
5
480
Ø118
135
28
175
40
280