Table of Contents
Advertisement
reduce interference with other networks and make it harder for unwanted users to
find and connect to your network.
Connect the Data Gateway
1. Connect one end of the coax cable to the cable outlet or splitter, and the other end to
the Data Gateway's Cable connector (3). Tighten the connections by hand, then tighten
an additional 1/8 turn with a wrench.
Note: For best performance, use high-quality coax cable and minimize or
eliminate splitters between the cable jack and the Data Gateway. If you are using
MoCA for your home network, MoCA filters must be installed on any legacy client
devices. Your service provider will install these filters for you.
2. Insert the plug from the power cord into the Power connector on the back of the Data
Gateway (4) and insert the power cord into a convenient AC outlet.
3. Connect one end of the Ethernet cable to any Ethernet port on the back of the Data
Gateway (2), and the other end to the Ethernet port on a computer, Ethernet hub, or
broadband router.
Note: If you are connecting to a computer, use the Ethernet cable included in the
Data Gateway package.
Touchstone DG3270 Data Gateway User Guide STANDARD Revision 1.1
Chapter 3: Install and connect your Data Gateway
18
Hide quick links:
Advertisement
Table of Contents
