Table of Contents
Advertisement
FUNCTION MENU SETUP
CTCSS/DCS Encode Setup
1. Press
key, the top left corner of LCD displays "
menu.
2. Press
/
key to choose NO.01 function item, it shows "T-CDC" on LCD.
3. Press
key to choose CTCSS, DCS or OFF, when DCS signaling is selected, press
choose DCS positive or inverse code.
4. Rotate channel selector knob to choose desired CTCSS/DCS code.
CTCSS: 62.5HZ-254.1HZ, 51groups in total, and 1 group user-defined code.
DCS: 000N-777I, 1024 groups in total. "N" stands for positive code, "I" stands for inverse code.
5. Press
or
Note: User-defined CTCSS encode must be setup by programming software.
CTCSS/DCS Decode Setup
If this function is enabled, you can ignore (can not hear) other unrelated call at the same frequency.
1. Press
key, the top left corner of LCD displays "
menu.
2. Press
/
key to choose NO. 02 function item, it shows "R-CDC" on LCD.
3. Press
key to choose CTCSS,DCS or OFF, when DCS signaling is selected, press
key to confirm and exit.
" icon, then press
" icon, then press
key to enter into function
key to
key to enter into function
key to
26
Advertisement
Table of Contents
