Fujitsu LifeBook S Series Manual page 47

The BIOS Setup Utility allows you to configure:
• Device control feature parameters, such as
changing I/O addresses and boot devices.
• System data security feature parameters,
such as passwords.
Entering the BIOS Setup Utility
To enter the BIOS Setup Utility do the following:
1. Turn on or restart your LifeBook notebook.
2. Press the [F2] key once the Fujitsu logo
appears on the screen with a prompt below
it. This will open the main menu of the BIOS
Setup Utility with the current settings
displayed.
3. Press the arrow keys to scroll through the
other setup menus to review or alter the
current settings.
Changing Video RAM Size
Your system is set up to use 16MB of video RAM
by default, but you can change the allocated
amount from within the BIOS. To change the
amount of video RAM, perform the following
steps:
1. Enter the BIOS Setup Utility as detailed
above.
2. Using the arrow keys, go to the Advanced
menu. Scroll down to select Miscellaneous
Configurations.
3. Scroll down to "UMA Video Memory Size",
and press the [Enter] key to see the
submenu.
4. Press the [Enter] key to see a drop-down list
of selections, or press the spacebar to cycle
through the selections.
5. When you have selected the amount of
memory you wish to use, press the F10 key
and select [Yes] when asked if you want to
save the configuration and exit.
LB_GARLICS 03 (29-38)
G e t t i n g S t a r t e d w i t h yo u r L i fe B o o k N o t e b o o k
35 21/7/03, 6:24 PM
35