Fujitsu LifeBook S Series Manual page 121

Setting the Microsoft network-sharing
service
1. Click [Start] -> [Settings] -> [Control Panel].
2. Double-click the [Network and Dial-up
Connections] icon. The [Network and Dial-
up Connections] window will be displayed.
3. Right-click [Local Area Connection], and click
[Properties] in the menu displayed. The
[Properties] window will be displayed.
4. If [File and Printer Sharing for Microsoft
Networks] is displayed, proceed to step 5. If
[File and Printer Sharing for Microsoft
Networks] is not displayed, skip to step 6.
5. Make sure that the [File and Printer Sharing
for Microsoft Networks] check box is checked,
and then click the [OK] button. Skip to "Setting
file-sharing function" on page 102.
6. Click [Install]. The [Select Network
Component Type] window will be displayed.
7. Click [Service], and then click the [Add]
button. The [Select Network Service] window
will be displayed.
8. Click [File and Printer Sharing for Microsoft
Networks] and then click the [OK] button.
Processing will return to the [Wireless
Network Connection Properties] window, and
[File and Printer Sharing for Microsoft
Networks] will be added to the list.
9. Click the [OK] button.
Setting the file-sharing function
The procedure for setting the file-sharing function
is laid down below taking the "work" folder within
drive C as an example.
1. Double-click [My Computer] on the Desktop,
and then double-click [Local Disk (C:)].
2. Right-click the "work" folder (or whichever
folder you wish to share), and click
[Sharing...] in the menu displayed. The
[Properties] window will be displayed.
3. Select the [Sharing] tab if it isn't already
selected.
4. Select [Share this folder], then enter data as
required:
• "Share name"
Enter the name of the folder to be shared.
LB_GARLICS 09 (106-116) 109
W i r e l e s s L A N U s e r 's G u i d e
• "Comment"
Enter explanatory statements or
notes about the folder to be shared.
• "User limit"
Enter the number of users who share
the folder.
• [Permissions]
Click the [Permissions] button to set
permission levels for access to the
folder.
• [Caching]
Click the [Caching] button to
configure settings for the off-line
access to the folder.
5. Click the [OK] button. The folder will be
set as a sharable folder, and the display
of the icon for the "work" folder will
change.
Setting the printer-sharing function
1. Click [Start] -> [Settings] -> [Printers]. A
list of connected printers will be displayed.
2. Right-click the printer for which the
sharing function is to be set, and then
click [Sharing...] in the menu displayed.
The property window corresponding to
the selected printer will be displayed.
3. Click the Sharing tab if it is not already
selected.
4. Check the [Shared as] checkbox and
confirm the name of the printer to be
shared or enter a new name. Click [OK].
Printer sharing will be set and the display
of the icon for the printer will change.
Confirming connection
After you have finished the network setup
operations, access the folder whose sharing
has been set, and confirm the status of the
radio in case of trouble such as a network
connection failure.
In the case of an infrastructure connection,
enter the necessary data for the access point
before confirming connection. Refer to the
manual of the access point for the access
point setup procedure
21/7/03, 6:29 PM
109