Fujitsu LifeBook S Series Manual page 120

L i f e B o o k S S e r i e s - A p p e n d i x
3. Right-click [Local Area Connection], and click
[Properties] in the menu displayed. The
[Local Area Connection Properties] window
will be displayed.
4. Click [Internet Protocol (TCP/IP] and then
click [Properties]. The [Properties] window
will be dis-played.
5. Set the IP address:
• For ad hoc connection
Select [Use the following IP address:],
then enter data in [IP address] and
[Subnet mask]. See page 114 for IP
address setting.
• For infrastructure connection
Select [Obtain
automatically] and [Obtain DNS server
address automatically].
Follow directions from the network
administrator about IP address settings,
DNS server setting, and the default
gateway.
6. Click the [OK] button. Processing will return
to the [Properties] window.
7. Click the [OK] button. If a message is
displayed that requests you to restart the
personal computer, click [Yes] and then
restart the computer.
Confirming the computer and workgroup
names
To modify the computer name and/or the
workgroup name, you need to be logged in
from Windows as an administrator.
1. Click [Start] -> [Settings] -> [Control Panel].
2. Double-click the [System] icon. The [System
Properties] window will be displayed.
3. Click the [Network Identification] tab.
4. Confirm the settings of [Full computer name]
and [Work group].
108
LB_GARLICS 09 (106-116)
5. To change the name, click [Properties], then
an IP address
6. Click the [OK] button. If a message is
Setting the sharing function
Set the sharing function to make file and/or printer
sharing with other network-connected personal
computers valid. The setting of the sharing
operation is not required unless the sharing
function is to be used.
The folder and printer for which the sharing
function has been set will be usable from any
personal computer present on the network.
To share a file and/or the connected printer,
you need to be logged in as an administrator.
108
• The setting of [Full computer name]
denotes the name for identifying the
computers on the network. Any name
can be assigned. The computer name
will be identified more easily if the model
number, the user name, and other factors
are already set.
• [Workgroup] denotes the group name of
the network.
proceed in accordance with the instruction
messages displayed on the screen.
Processing will return to the [System
Properties] window.
For ad hoc connection:
Assign the same network name to all
personal computers existing on the network.
For infrastructure connection:
Assign the name of the workgroup to be
accessed.
displayed that requests you to restart the
personal computer, click [Yes].
21/7/03, 6:29 PM