Scan; Activating Talkgroup Scanning; Security; Air Encryption - Motorola ST7000 Feature User Manual

Mobile release 18.5
Hide thumbs Also See for ST7000:
Table of Contents

Advertisement

NOTICE:
Activation code must be sent to the device by third-party application.
Radio-initiated automatic reconnection with several remote Bluetooth devices at the
same time cannot be guaranteed to be successful in 100%, due to the fundamental
nature of Bluetooth. In case the reconnection fails after a power cycle (power off and
power on of the radio), reconnect the device manually.
The radio is now able to notify the dispatcher when the status of the firearm device changes. If
configured, the location (using GNSS) of the radio is reported as well. Once a firearm sensor
device is connected, it can be managed from the Devices menu.
4 To disconnect a firearm sensor device, go to the Devices menu and follow the normal device
management procedure.
4.9

Scan

This menu item allows you to activate/deactivate scanning and view the active scan list. This feature is
available only for the TMO Mode. Your radio joins any group call as long as this group is defined in the
scan list and scan is turned on.
4.9.1

Activating Talkgroup Scanning

When and where to use: If you want to monitor any TMO Group Call in the defined talkgroup list.
Procedure:
1 From the home screen, press the Menu/OK key.
2 Select Scanning.
3 Do one of the following:
On/Off – activate or deactivate scanning.
Select List – displays the available scan lists.
NOTICE: To activate a scan list, select the required scan list and press Menu/OK.
Your radio is scanning on the predefined scan list.
4.10

Security

This sub-menu stores all your security settings.
4.10.1

Air Encryption

NOTICE: This feature is a selling feature.
Air Encryption is a feature that enables encryption of entire communication between the radio and
infrastructure, which results in increased security of calls, messages, and data.
If configured by your service provider, the radio plays a sound and displays Call & Data Not
Encrypted when encryption is on and you receive a clear call (unencrypted). This feature provides
service confidentiality between you and the system.
MN002958A01-AF
Chapter 4: Main Menu
67

Advertisement

Table of Contents
loading

Table of Contents