Dgna Auto Reselect Group; Broadcast Call; Phone And Pabx Calls; Local Site Trunking - Motorola ST7000 Feature User Manual

Mobile release 18.5
Hide thumbs Also See for ST7000:
Table of Contents

Advertisement

MN002958A01-AF
Chapter 3: Modes
3.1.5.3

DGNA Auto Reselect Group

If the DGNA Auto Reselect is configured, whenever a talkgroup assigned by the network operator
through the DGNA is deassigned without the user action, the radio returns to the previously selected
group.
3.1.6

Broadcast Call

Broadcast Group Call (also called Site Wide Call) is a high-priority group call from the console operator
(or dispatcher) to all users located at one or more sites. The radios are configured to monitor a
Broadcast Call, but you cannot talk back. The call can be received as a normal Broadcast Call or an
Emergency Broadcast Call. The Broadcast Call preempts an ongoing Group Call that has the same or
lower call priority.
NOTICE: Your radio is only able to receive Broadcast Calls.
3.1.7

Phone and PABX Calls

Phone Calls allow you to call a landline telephone number or a cellular mobile phone number. Private
Automatic Branch Exchange (PABX) Calls allow you to call local (office) extension numbers.
NOTICE: This feature is available only in Trunked Mode Operation (TMO).
The Phone/PABX Speed Dial feature allows you to dial a shortened number of up to three digits
instead of the full number. The Phone/PABX Speed # number is assigned when the dialed number is
added in the contact list.
3.2

Local Site Trunking

This mode is also called as Fallback Mode and it allows more than one radio from the same site to
communicate when the link between the site and the network central controller fails. Entering and
exiting Local Site Trunking (that is, returning to System Wide Services) is done automatically. In this
mode, some services are unavailable.
NOTICE: Your service provider can disable this mode.
3.2.1

Entering Local Site Trunking

When your radio receives a Local Site Trunking indication from the system, the following occurs:
Your radio plays an Entering Local Site Trunking tone.
Display shows the Local Area Service message.
Any call in progress is dropped upon entering Local Site Trunking Mode.
If configured by your service provider, this message/alert is periodically repeated to remind you that
your radio is still operating in Local Site Trunking Mode. The following features are available:
Registration
Attachment
38

Advertisement

Table of Contents
loading

Table of Contents