Connecting To A Tv Or Monitor; Using Your Dvd Player; Turning Your Player On; Playing A Dvd Or Audio Cd - Insignia NS-DD10PDVD19 User Manual

Connecting to a TV or monitor

You can connect your player to a TV or monitor so you can watch DVDs or view
photos on the TV or monitor.
Plug the AV adapter cable into the AV OUT jack on your DVD player.
1
TV or monitor
Plug an AV cable (not included) into the other end of the AV adapter cable.
2
Make sure that the colors on the connectors match.
Plug the other end of the AV cable into the AV jacks on the TV or monitor,
3
making sure to match the colors on the connectors with the jacks.
Turn on the TV or monitor.
4
Note: You may need to select the correct input on the TV or monitor.

Using your DVD player

Turning your player on

Slide the ON/OFF switch on the side of your player to the ON position.
1
After use, slide the ON/OFF switch to the OFF position.
2

Playing a DVD or Audio CD

Notes:
• Most DVDs and your players have region codes that help control illegal
distribution of DVDs. The region code for your player is 1. You can only play
DVDs with a region code of 1 or ALL. The region code for a DVD is usually
printed on the DVD or the DVD packaging.
• This User Guide explains the basic instructions for operating your players.
Depending on how a DVD is produced, the DVD may have specific or limited
playback features and may not respond to all your commands. THIS IS NOT
A DEFECT. Refer to the instructions accompanying a specific DVD for more
information about the options available on that DVD.
Make sure that your player is connected to power.
1
Slide the ON/OFF switch to the ON position.
2
ON OFF ON OFF
AUDIO VIDEO
In In
www.insigniaproducts.com
10" Dual Screen Portable DVD Player
AV OUT AV IN DC IN 9-12V
AV adapter cable
White=left audio
Red=right audio
Yellow=video
15