Setting Up Your Player; Installing Remote Control Batteries; Connecting A Tv With Composite Video - Insignia NS-CADVD User Manual

# Button
25 MENU
26 RETURN
27 SLOW
28 STEP
29
NEXT
30
PREV
31
FWD
32
REV
33
PLAY

Setting up your player

Installing remote control batteries

To install remote control batteries:
1 Remove the battery compartment cover.
2 Insert two AAA batteries into the battery
compartment. Make sure that the + and –
symbols on the batteries match the + and –
symbols in the battery compartment.
4
Description
When playing a DVD, press to open
the DVD's menu. Some DVDs do not
support this feature.
When playing a DVD, press to return
to the DVD menu. Some DVDs do
not support this feature.
Press to play a DVD in slow motion.
Each time you press this button, the
slow-motion speed changes. Press
PLAY to resume normal playback.
Press once to pause playback. Press
repeatedly to advance one frame at a
time. Press PLAY to resume
normal playback.
Press to go to the next DVD chapter,
CD track, or picture.
Press to go to the previous DVD
chapter, CD track, or picture.
Press to fast forward on a disc. Each
time you press this button the
fast-forward speed increases. Press
PLAY to resume normal playback.
Press to fast reverse on a disc. Each
time you press this button the
fast-reverse speed increases. Press
PLAY to resume normal playback.
Press to start playback. When
playback is paused, press to resume
playback.
www.insignia-products.com
Insignia NS-CADVD DVD Player
3 Replace the cover.
Notes
• Do not mix different types together or old
batteries with new batteries
• If the remote control will not be used for a long
time, remove the batteries to prevent possible
damage from leakage.
• To prevent leakage, remove exhausted
batteries immediately.
• Typical battery life is about six months of
normal use.

Connecting a TV with composite video.

To connect a TV with composite video:
1 Connect a standard video cable to the Video
Out jack on the back of your player and to the
AV IN jack on the back of the TV.
Video cable
Back of player
CVBS
OPTICAL OUT PUT
VIDEO OUT
Audio cable
2 Connect an audio cable to the Audio Out
jacks on the back of your player and to the AV
AUDIO IN jacks on the TV.
3 Turn on the TV, then select the appropriate
input source. For more information, see the
documentation that came with the TV.
TV