Insignia NS-DD10PDVD19 Quick Setup Manual

NS-DD10PDVD19_18-0377_QSG_V2_EN.ai 1 7/8/2018 9:36:33 PM NS-DD10PDVD19_18-0377_QSG_V2_EN.ai 1 7/8/2018 9:36:33 PM
QUICK SETUP GUIDE
10" Dual Screen
Portable DVD
Players
NS-DD10PDVD19
PACKAGE CONTENTS
• DC vehicle power adapter
• 10" Dual Screen Portable DVD Players (2)
• Car headrest mounts (2)
• AV connecting cable to connect your players
• AV cable to connect your player to a TV or monitor • Travel storage case
• Quick Setup Guide
• Remote controls (2)
• AC/DC power adapters (2)
FIND YOUR USER GUIDE ONLINE!
Go to www.insigniaproducts.com, enter your model in
the search box, then press ENTER. Next to Features,
click Support & Downloads, then next to User Guide,
click the language you want.
SETTING UP YOUR PLAYER
To connect to a 12V power outlet
• Plug the included Y-type vehicle power adapter into your player(s) and
then into a 12V power outlet.
12V power outlet
DVD
player A
To connect to AC power
• Plug the included AC adapter into your player and then into a power
outlet.
ON OFF ON OFF AV OUT AV IN DC IN 9-12V
Before using your new product, please read these instructions to prevent any damage.
V2
FINAL
FOR PRINT
Final size (W×H): 12 ×10 in. (304.8 × 254 mm.)
FEATURES
DVD players A and B
open
USING YOUR DVD PLAYER
Play a DVD or Audio CD
Note: Most DVDs and your DVD player have region codes that help control
illegal distribution of DVDs. The region code for your player is 1. You can
only play DVDs with a region code of 1 or ALL. The region code for a DVD is
printed on the DVD or the DVD packaging.
1 Make sure that your player is connected to power.
2 Slide the ON/OFF switch to the ON position.
3 Slide the OPEN switch. The disc tray opens.
4 Place a disc, label side up, in the disc tray, then close the tray.
The disc starts playing automatically.
5 Use the player navigation controls and buttons on the DVD
player to control playback.
For more information about using your Portable DVD player, see
your online User Guide at www.insigniaproducts.com.
Connecting your two DVD players
DVD
1 Using the AV connecting cable, connect the AV OUT jack on one
player B
player to the AV IN jack on the other player.
2 Make sure that both players are connected to power.
3 Turn on the DVD players.
4 Press and hold the SOURCE/SETUP button on the player with
the cable going to the AV IN jack until AV IN appears on the
screen.
DVD player
DVD player
AV connecting cable
# DESCRIPTION FUNCTION

1 OPEN latch Slide to open the disc tray.
2 Power indicator Lights blue when your player is powered and turned on.
3  In playback mode, press to skip back on a disc. Press and hold to
Up/Previous/VOL– decrease the volume.
In menus, press to move up.

4 In playback mode, press to skip forward on a disc. Press and
Down/Next/VOL+ hold to increase the volume.
In menus, press to move down.
5 Source/Setup Press to switch between AV mode (to watch the same DVD on
both players) and disc mode (to watch a different disc on each
on each player.
6 In playback mode, press and hold to start or pause playback.
Left/Play/Pause In menus, press to move left.
7 Right/Stop In playback mode, press and hold to stop playback. If you press
this button once, then press the Play button, playback resumes
where is stopped. If you press this button twice, then press the
Play button, playback begins at the beginning of the disc.
In menus, press to move right.
8 Speakers Provide audio output when headphones are not connected.
9 ON/OFF switch Slide to turn your player on or off.
10 (headphone) Plug headphones into this jack.
jack
Connect either the AV connecting cable to this jack to share
11 AV OUT jack
playback with the other DVD player or the AV adapter cable to
view playback on a TV or monitor.
12 AV IN jack Connect the AV connecting cable to this jack to receive playback
from the other DVD player.
13 DC IN jack Plug the AC adapter or 12V car adapter into this jack.
14 Strap slots Slide the mounting straps through these slots when installing
your player in a vehicle.
15 Stand Pull out to set your player on a desktop or table.
Remote control batteries are preinstalled
and have a plastic tab that must to be
removed to operate your players.
12V power outlet
or
AC/DC power
adapters