Connecting Power; Using Component Video (Best) - Insignia NS-D160A14 User Manual

Connecting power

To connect power:
• Plug the power cord into a power outlet.
Cautions
• Your DVD player should only be operated from
the power source indicated on the label.
• Always unplug the power cord from the power
outlet when you will not be using your DVD
player for an extended period of time.
8
CAUTION- VISIBLE AND INVISIVLE LASER RADIATION
WHEN OPEN.
DO NOT STARE INTO BEAM.
DVD PLAYER
This product complies with FDA Rule
MODEL: NS-D160A14 120V~ 60Hz 11W
21CFR Chapter 1, Subchapter J in
Best Buy
effect at date of manufacture.
Manufactured for Insignia Products
7601 Penn Ave S. Richfield, MN 55423 USA
www.Insigniaproducts.com
S/N:
This Class B digital apparatus complies with Canadian
ICES-003. Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada.
MADE IN CHINA
www.insigniaproducts.com
NS-D160A14 Insignia DVD Player

Using component video (best)

To connect your DVD player using component
video:
1 Make sure that the power cords for your DVD
player and the TV are unplugged.
2 Connect a component video cable (not
included) to the COMPONENT VIDEO OUT
jacks on the back of your DVD player and to the
component video in jacks on the back of the TV.
Cable connectors are often color-coded to match color-coded jacks.
Back of player
Analog audio cable
3 Connect an analog audio cable to the AUDIO
OUT jacks on the back of your DVD player and
to the audio in jacks on the TV.
Note
The COMPONENT VIDEO OUT jacks share the
AUDIO OUT jacks with the VIDEO OUT jack.
4 Plug in the power cords, then turn on the TV and
your DVD player.
5 Select the video input source on the TV that you
connected your DVD player to. For more
information, see the documentation that came
with the TV.
Component video cable