Connecting; Wiring And Block Diagram - Siemens SIMATIC ET 200SP Manual

Connecting

3.1

Wiring and block diagram

This section includes the block diagram of the DI 16x24VDC ST module with the terminal
assignments for a 1-wire connection.
Information on wiring the BaseUnit can be found in the system manual ET 200SP distributed
I/O system (http://support.automation.siemens.com/WW/view/en/58649293).
Note
The load group of the module must begin with a light-colored BaseUnit. Keep this in mind
also during the configuration.
Note
Make sure that you only use digital modules with BaseUnit type A0 during commissioning.
14
Digital input module DI 16x24VDC ST (6ES7131-6BH01-0BA0)
Manual, 09/2017, A5E03573442-AF
3